News

The rack and gear will have its own unique movement characteristics in the transmission process: the gear transmission is used to transmit the movement and power between any two axes, its peripheral speed can reach 300m/s, the transmission power can reach 105KW, and the gear diameter can be from Less than 1mm to more than 150m, it is the most widely used mechanical transmission in modern machinery.

Double pitch roller chain is equivalent to standard roller chains just with "double the pitch". For example, #80 roller chain has a 1" pitch and C2080 double pitch roller chain has a 2" pitch but all other dimensions are equal to an ANSI standard #80 roller chain.

This article introduces several commonly used packaging of our chain！

The steels commonly used in the manufacture of gears are quenched and tempered steel, quenched steel, carburized and quenched steel and nitrided steel. The strength of cast steel is slightly lower than that of forged steel, and it is often used for gears of larger size; gray cast iron has poor mechanical properties and can be used in light-load open gear transmission;

Three methods for identifying chain quality are summarized below

The sprocket has gradually lost its widespread use. For example, in industrial and agricultural commodities such as machinery and equipment, vehicles, transmissions, transmission cases, etc., it is a relatively important component in transmission equipment. In order to extend its service life, we It needs to be installed firmly in the later installation, so that the running-in of each component reaches the standard,

Hot die forging is still a widely used blank casting process for car gear parts. In recent years, cross wedge rolling technology has been widely promoted in shaft processing. This technology is especially suitable for more complex stepped shaft blanking, which not only has high precision, small post-processing allowance, but also high production efficiency.

The chain sprocket is a component that is often used in production and life. When not in use, these objects cannot be left in one place casually, otherwise the quality of the chain sprocket will be easily damaged.
When storing these products, the first is not to place them in places where the environment is relatively humid, the temperature is high, and there are chemically corrosive substances.

Shafting is a crucial power transmission element as they transmit motive power within a machine or system. They are long pieces of metal that are formed to a specific diameter. Our shafting is available in several standard materials such as C1045, C1018, 303-stainless, 304-stainless, 316-stainless, and 1060 steel For linear shafting.

We Manufacture full line of ANSI standard,European Standard 304-grade stainless steel sprockets both as A-Plate style,B-Hub style and C-Hub style. We can supply sprockets with finished bores ,Pilot bore .Typically our sprockets are manufactured out of 304 grade stainless steel.