News

The conveyor chain is the same as the transmission chain, and the precision conveyor chain is also composed of a series of bearings, which are fixed by the constraining chain plates, and the positional relationship between them is very precise.

In fact, the conveyor chain is similar to the transmission chain. The precision conveyor chain is also composed of a series of bearings. They are fixed by the chain plate with restraint function, and the positional relationship between them is very precise. Each bearing consists of a pin and a sleeve on which the rollers of the chain rotate.

Chains are classified according to different materials and shapes. This article will introduce some different types of chains.

These details should not be ignored when the chain is used. The chain may not be removed during cleaning, or the chain may be removed for thorough cleaning. Thorough cleaning is to remove the chain and soak it in a cleaning agent (gasoline or kerosene) for part of the time, then brush it section by section with a brush. After cleaning, immerse the chain in lubricating oil at 70～80℃, make it oil-filled, and then install and use it.

This AK17 Pulley 5/8" bore is directly interchangeable with other manufacturers, is 1.75" in diameter, is used with A style V-Belts.

Weld-on hubs are constructed for use with taper bushes, offering a cost-effective option for stable mounting of ventilators, fan propellers, plate sprockets, and other equipment on a shaft.

Selection of KC Coupling

In the United States , power transmission chains must meet ANSI B29.1, thus earning the name ANSI chains . In other countries , the chains must meet IS B1801, ISO 606A, or ISQ 1395C.

Sprockets and gears are both used to transmit power within machines or to move items by interlocking with them. But what's the difference between them?

The taper sleeve is mainly divided into Taper Lock Bushing, QD Bushing and Split taper bushing. The holes where the taper sleeve and the pulley match are half-sided, and the two light holes on the taper sleeve and the two threaded holes on the pulley are respectively A complete hole is formed, and a threaded hole on the taper sleeve and a smooth hole on the pulley form a complete hole. When assembling, put the two screws in the two threaded holes of the pulley.