Industrial Chain and Sprocket Manufacturer

Language:

English

Contact Now！

Home / All

News

The Introduction Of Different Sprockets
The sprocket functions as a timing belt and is an important part of the engine valve system. It is connected with the crankshaft and matched with a certain transmission ratio to ensure the accuracy of the intake and exhaust time. The function of the sprocket is the ignition sequence (time) of the piston stroke (up and down movement) of the valve opening and closing when the engine is running
Nov 18,2021
Advantage and disadvantage of rigid flange coupling
Rigid flange couplings are commonly used in large, straight shafts where tight alignment tolerances must be maintained.
Nov 18,2021
Different Types Of Gear
Gear is a mechanical part with teeth on the rim that can continuously mesh and transmit motion and power. Gears rely on the meshing of teeth to transmit torque. The gear is transmitted with other toothed mechanical parts (such as another gear, rack, worm).
Nov 16,2021
All About Chain Couplings - Attributes and Specifications
Chain couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies.
Nov 16,2021
Different Types Of Coupling
Coupling refers to a device that connects two shafts or a shaft and a rotating part, and rotates together in the process of transmitting movement and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from being subjected to excessive loads and play a role in overload protection.The following will introduce six different couplings
Nov 11,2021
DOUBLE PLUS Chain
DOUBLE PLUS Chain is a new type that meets low noise requirements and high safety standards.
Nov 11,2021
Different Types Of Bushings
The bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection,
Nov 9,2021
Difference Between Chain Drive and Belt Drive
Both a chain drive and a belt drive are part of mechanisms that allow locomotion and a transfer of power within a particular piece of machinery.
Nov 8,2021
Types of Pulleys
A pulley consists of a rope and a hub or "drum" in which there is a grooved wheel mounted with an axle.
Nov 5,2021
The Introduction Of FCL Coupling
The FCL type elastic coupling conforms to the Japanese national standard JISB1452. The FCL type elastic sleeve pin coupling uses a pin with an elastic sleeve (rubber material) at one end and is installed in the flange holes of the two coupling halves to achieve two The coupling of the half coupling.
Nov 4,2021
Types and applications of chain couplings
The roller chain coupling consists of two shafts, a chain, a cover, and a general sprocket
Nov 2,2021
Different Types Of Sprockets
In this blog, we will discuss the different types of industrial chain sprockets.
Nov 2,2021