Three Ways To Identify Chain Quality
Three Ways To Identify Chain Quality
1.From the appearance to distinguish the quality of the chain
Mainly to see if there is no deformation of the chain of the situation, there is the emergence of cracks, corrosion and other issues, there are pins, rollers, joint parts can be normal, there is no loose deformation, wear cracks , There is to check the chain in the use of the time will not be issued other sounds, or to show abnormal vibration conditions, and to ensure that the chain has a good smooth situation.
2.The precise measurement of the length of the chain
In the measurement before the first clean up their clean, and then to measure the chain around the two sprockets above, so that it can have better support. In the measurement of the time, in the stainless steel chain to bear a certain load above, so that the chain can have a good tension, the chain in the sprocket in the use of the time to ensure that there can be a good combination of teeth, between the two sprockets Of the center from the measurement out.
3.The elongation of the chain measured out
In order to solve the gap above the chain, the chain is required to apply a certain tension to stop the measurement. In order to ensure that the error of the measurement result per hour is small, the measurement should be stopped at an appropriate position according to the actual situation, and then the length extension should be extreme.
Contact Us-Welcome To Send Us Inquiries!!!
Kimer Zheng
Hangzhou YangQi Imp&Exp Co.,Ltd
杭州阳奇进出口有限公司
Room 1310,Taotiandi Buliding 2,Jianggan District,Hangzhou City ,Zhejiang
Sales2@Chinatransmissions.Com
Mob/Whatsapp/wechat:+008618258831202
Www.Chinatransmissions.Com
