
Wholesale Supply
For You

150,000 Products
Complete variety

More than 14 Years
Trust and experience

ANSI, ISO
Satisfaction guaranteed
Home / All / Agricultural Machinery Chain / Hay Elevator Chain / SDC 55 Steel Detachable Chain | Hay Elevator Chain



SDC 55 Steel Detachable Chain | Hay Elevator Chain
SDC 55 steel detachable chain for hay elevators, manure spreaders and silage conveyors. Hook-and-eye links, field-repairable, C1 / HB4 / G27 attachments.
| Share | |
|---|---|
| Categories | Hay Elevator Chain |
| Brand | CTS-ChinaTransmissionS |
| Product Specifications | SDC 55 Chain |
| Material | Carbon Steel |
| Color | Natural |
| Surface Treatment | Shot Peening/Heat Treatment/Plating/Lubrication |
| Accuracy | High precision cornhead gathering chain |
| Quality | Durable cornhead gathering chain |
| Interchangeability | Directly interchangeable with other brands |
Detail Information
A detachable chain is a series of formed steel links. Each link has a hook at one end and an eye at the other. To assemble a run, you hook the next link in and rotate it ninety degrees into its working position; to remove one, you rotate it back and lift it out.
There is no pin to seize, no cotter to lose, and no press to find. On a machine that works in chaff, dust, and damp crop, that matters more than a small loss of strength compared with a roller chain: the usual failure mode of a roller chain in this environment is a pin joint that stops articulating because the lubricant has turned into grinding paste. The SDC Detachable Chain is mainly used in hay elevators, manure spreaders, and silage conveyors.
For more information or to get a quote, please contact us.
If you are unsure whether your machine takes SDC 55, measure the old chain and compare it with the dimension table below, or send us a photo of a link next to a ruler.
- P: 1.630"
- M: 1.281"
- E: 0.831"
- D: 0.796"
- T: 0.125"
- Ultimate Strength Pounds: 2800 LBS

Choosing Attachments: Steel Detachable Chain Attachments
C1 Attachment
Used for catching and lifts hay bales.
HB4 Attachment
Provided as a matched and tagged pair with bolted slats, distributes the load evenly for higher capacities.
G27 Attachment
Ensures even load distribution, similar to the C1, making it suitable for handling higher loads.
The links start as steel strips, are formed and punched in a press, then heat-treated to give a hard wear surface on the hook and eye while keeping the body tough enough not to crack when a foreign object goes through the machine.
Two things separate a chain that lasts from one that does not:
Pitch accuracy. If the hooks are not consistently formed, the chain does not sit evenly in the sprocket, load concentrates on a few links, and the whole run stretches unevenly.
Heat treatment control. Too soft and the hooks open up in a season; too hard and links snap instead of bending. Reputable makers control hardness across the hook section, not just on the surface.
✔ It survives dust. No pin joints mean nothing to seize when the lubricant is gone.
✔ It is repairable where the machine is. A broken link in a hay barn is a ten-minute repair, not a workshop job.
✔ It carries slats and flights easily. Attachments are formed into the link or bolted through it, so the chain becomes the conveyor.
✔ It self-cleans. The open hook geometry lets chaff fall through instead of packing into a joint.
✔ It is inexpensive to replace in sections. You replace the worn links, not the whole run.
That combination is why SDC 55 shows up on bale elevators, hay elevators, bunk feeders, manure spreaders, silage and forage conveyors, grain elevators, and a long list of barn and yard equipment.
Tell us the detachable chain number, the attachment code (C1 / HB4 / G27), the number of links or the run length, and the quantity. If you are replacing a branded chain, send the OEM number, and we will confirm the equivalent.
What does SDC stand for?
Steel detachable chain. The "55" is the size designation within that family, not a length or a strength rating.
How strong is SDC 55 Chain?
The published ultimate strength for this size is around 2,800 lb. Working tension should stay well below that — detachable chain is selected based on wear life and shock loading, not on ultimate strength alone.
Review
- 加载中···
Please send your message to us
Send us your requirements or drawings, and our team will provide a professional solution and quotation. Get Your Quote Today!
Tips: To help us quote quickly and correctly, please add these details:
1. Product model / part number
2. Quantity
Tips: To help us quote quickly and correctly, please add these details:
1. Product model / part number
2. Quantity
- Name
- *Title
- *Content


