Wholesale Supply
For You
150,000 Products
Complete variety
More than 14 Years
Trust and experience
ANSI, ISO
Satisfaction guaranteed
Home / All / Taper Bush & Hubs / Split Taper Bushing / U2 Split Taper Bushing | 2-7/16"-5" Bore | CTS
U2 Split Taper Bushing | 2-7/16"-5" Bore | CTS
U2 split taper bushing: 2-7/16"-5" bore, 1,680 in-lbs, cast iron. Longest U-family hub, maximum shaft engagement. Browning U2 compatible. ISO 9001.
Detail Information
About U2 Split Taper Bushing
CTS® U2 Split Bushing
The U2 is the longest in the U series split taper bushing — the same 6" OD and 7" bolt circle as the U0 and U1, but with the deepest shaft engagement in the trio, which spreads the load and resists fretting on crushers, elevators, and big conveyors that see shock and reversing loads. It is built for continuous industrial duty: three 5/8" cap screws at 1,680 in-lbs of clamp, stock bores from 2-7/16" to 5", a 50 lb cast iron body with a precision-machined taper, and simple removal via the hub's jacking holes at overhaul time. Because all three U lengths share one bolt circle, you can standardize on the U envelope and swap lengths without touching the hub bore.
Standard Browning-style size: direct interchange with Browning U2 and Martin U2. Selection numbers: bore 2-7/16" to 5", torque 1,680 in-lbs; full dimensions are in the technical table above.
For a quotation or other information on Split Taper Bushing, please contact us; we will gladly help you.
Quality Assurance:
ISO9001: 2015 and GB/T24001-2016 / ISO14001: 2015.
U2 Split Taper Bushing Technical Data
U2 Split Bushing Dimensions
Stock Bore Range(in):
Cap Screws:
Review
- 加载中···
Please send your message to us
Send us your requirements or drawings, and our team will provide a professional solution and quotation. Get Your Quote Today!
- Name
- *Title
- *Content
Products
Application
about
