Home / All / Industry News

Industry News

  • What Is The CA550 Agricultral Chain?
    What Is The CA550 Agricultral Chain?
    Agricultural Roller Chains are manufactured of hardened steel parts to close tolerances. They provide high quality, increased strength and longer life within their service range.
    Nov 15,2023
  • What Is Weld-On Hubs ?
    What Is Weld-On Hubs ?
    Taper Bore Weld-on-Hubs are made out of steel, drilled, tapped and taper bored to receive standard Taper Bushes.
    Nov 13,2023
  • What Is The QD Bushing?
    What Is The QD Bushing?
    QD bushings, also known as quick-disconnect bushings, are used throughout the industrial power transmission and agricultural industries for various sprocket, sheave, pulley, and synchronized drive needs.
    Nov 7,2023
  • What Is Split Taper Bushing?
    What Is Split Taper Bushing?
    The split tapered bushing alleviates the need to have a component bored to size, ideally lowering on hand requirements and allowing for changes in shaft size if necessary. The barrel of the split tapered bushing is split in two places and is keyed to the shaft.
    Nov 7,2023
  • What is the manufacture process of v-belt pulley
    What is the manufacture process of v-belt pulley
    The manufacture process of v-belt pulley: Material Prepation - Cast Iron - CNC Maching - Grooving - Surface Treatment -Cleaning & Packing
    Nov 2,2023
  • What Is The Manufacture Process Of Locking Assembly
    What Is The Manufacture Process Of Locking Assembly
    The manufacture process of locking assembly is : Material Preparation - CNC Maching - Bore Drilling - Benching Process - Assemble - Cleaning & Packing
    Nov 2,2023
  • What Is Gear Rack?
    What Is Gear Rack?
    A gear rack is a type of gear on which gear teeth are cut on one face of a bar. The bar can be square, round or rectangular in cross section and the teeth can be either parallel to the base or set at an angle. They are a simple and common type of element in mechanical drive systems and are always paired with a pinion.
    Oct 16,2023
  • What is Idler Sprocket?
    What is Idler Sprocket?
    An idler sprocket is an essential component in many mechanical systems. Its primary function is to guide and maintain the proper tension of a chain or belt that is transmitting power.
    Oct 16,2023
  • Bevel gear cutting on milling machine
    Bevel gear cutting on milling machine
    Cutting bevel gears on a milling machine involves a different approach compared to spiral bevel gears.
    Oct 11,2023
  • Bevel gear cutting on milling machine
    Bevel gear cutting on milling machine
    Removing burrs from a sprocket is important for several reasons.
    Oct 11,2023
  • why the sprocket need Remove the Bur
    why the sprocket need Remove the Bur
    Gear laser quenching, also known as laser hardening or laser surface hardening, is a heat treatment process used to enhance the hardness and wear resistance of gear teeth. It involves using a high-energy laser beam to rapidly heat the surface of the gear teeth and then quickly cooling it off, resulting in a hardened layer on the gear surface.
    Oct 11,2023
  • Milling of spiral bevel gear
    Milling of spiral bevel gear
    Milling spiral bevel gears is a complex process that requires precision and expertise. Here are some key points to consider:
    Oct 11,2023

Are you looking for a reliable manufacturer of down home textile products?

We can quickly provide customers with market analysis, technical support and customized services.